UniStream PLC I/O Modules

Option 1
The easiest method for connecting IO to the UniStream range of PLCs is directly to the back of the unit using the IO expansions outlined below on this page. The IO in the table below can be fitted directly to the back of the HMI.

Option 2
UniStream PLCs also supports Din-rail mounted elsewhere using a IO Expansion Module.

NEW! Option 3
UniStream now offers a new range of dedicated slim Remote IO over Ethernet to offer greater flexibility for Din-rail mounted IO. Find out more HERE

IO connected directly to UniStream PLCs (Option 1)

		Inputs					Outputs
	Expansion Module	Digital	HSC/Shaft-encoder	Analogue	Temp	Weight	Transistor	PWM/HSO	Relay	Analogue	Operating Voltage	Install Guide	Tech Spec
Digital (Isolated)	UID-1600	16 Sink/Source	None	None	None	None	None	None	None	None	24V DC
	UID-0808T	8 Sink/Source	None	None	None	None	8 Source (pnp)	None	None	None	24V DC
	UID-W1616T	16 Sink/Source	None	None	None	None	16 Source (pnp)	None	None	None	24V DC
	UID-0808THS	8 Sink/Source	2 250kHz 32-bit	None	None	None	8 Source/Sink	2 @ 250kHz 2 @ 3kHz	None	None	24V DC
	UID-0016T	None	None	None	None	None	16 Source (pnp)	None	None	None	24V DC
	UID-0808R	8 Sink/Source	None	None	None	None	None	None	8	None	24V DC
	UID-W1616R	16 Sink/Source	None	None	None	None	None	None	16	None	24V DC
	UID-0016R	None	None	None	None	None	None	None	16	None	24V DC
Analogue & Temp	UIA-0006	None	None	None	None	None	None	None	None	6 0-10V 14-bit±10V 13-bit + sign 0-20mA, 4-20mA 13-bit	24V DC
	UIA-0402N	None	None	4 0-10V, 0-20mA, 4-20mA 13-bit	None	None	None	None	None	2 0-10V 14-bit±10V 13-bit + sign 0-20mA, 4-20mA 13-bit	24V DC
	UIA-0800N	None	None	8 0-10V, 0-20mA, 4-20mA 13-bit	None	None	None	None	None	None	N/A
	UIA-0800NH	None	None	8 0-10V, 0-20mA, 4-20mA With HART Communication	None	None	None	None	None	None	N/A
	UIS-04PTN	None	None	None	4 PT100/ NI100/ NI120	None	None	None	None	None	N/A
	UIS-04PTKN	None	None	None	4 PT1000/ NI1000/ NI1200	None	None	None	None	None	N/A
	UIS-08TC	None	None	None	8 Thermocouple	None	None	None	None	None	24V DC
Digital/ Analogue	UIS-WCB1	10 Sink/Source	2 10kHz 32-bit	2 (Isolated)0-10V, 0-20mA, 4-20mA 14-bit	2 (Isolated) Thermocouple, PT100/ NI100/ NI120	None	2 Sink	2 @ 250 kHz	8	2 0-10V 14-bit±10V 13-bit + sign 0-20mA, 4-20mA 13-bit	24V DC
Digital/ Analogue	UIS-WCB2	10 Sink/Source	2 10kHz 32-bit	2 (Isolated) 0-10V, 0-20mA, 4-20mA 14-bit	2 (Isolated) Thermocouple, PT100/ NI100/ NI120	None	8 Source (pnp) 2 Sink (npn)	2 250kHz (Sink Outputs Only)	None	2 0-10V 14-bit±10V 13-bit + sign 0-20mA, 4-20mA 13-bit	24V DC
CANBus High Speed IO
CANBus High Speed IO	EX-RC1	Needed for Remote IO expansion Remote I/O adaptor module via CANbus, multiple EX-RC1 adaptors may be connected to each PLC with up to 8 I/O expansion modules per adaptor. See Below for more details*									12/24V DC

If you would like to connect remote IO over CANbus then the following Expansion adaptor is required.

The EX-RC1 adaptor is a stand alone network adaptor that connects to up to eight IO modules via ribbon cables but then connects to the master PLC on a CANbus network. The CANbus cable is user supplied.

The EX-RC1 Expansion module can be connected to a UniStream PLC to allow the use of these DIN-rail mounted IO modules over CANbus.

UniStream PLC I/O Modules

IO connected directly to UniStream PLCs (Option 1)

Inputs

Outputs

Expansion Module

Digital

HSC/Shaft-encoder

Analogue

Temp

Weight

Transistor

PWM/HSO

Relay

Analogue

Operating Voltage

Install Guide

Tech Spec

Digital (Isolated)

UID-1600

UID-0808T

UID-W1616T

UID-0808THS

UID-0016T

UID-0808R

UID-W1616R

UID-0016R

Analogue & Temp

UIA-0006

UIA-0402N

UIA-0800N

UIA-0800NH

UIS-04PTN

UIS-04PTKN

UIS-08TC

Digital/Analogue

UIS-WCB1

UIS-WCB2

CANBus High Speed IO

EX-RC1

Digital/
Analogue